TekTouchPad Podium Installation

To download the full installation guide, which includes detailed instructions & graphics for each step, click here.

To visit the 78034 TekTouchPad Touchscreen Controller Product Page, click here.

Included in this Product Package:

  • 3.5″ TekTouchPad
  • Back Mounting Plate
  • Mounting Wedge
  • DC Power Supply
  • DB9/RJ12 TekTouchPad Serial Cable
  • 3-pin/DB9 Serial Cable
  • #6 Wood Screws (4)
  • 6-32 Machine Screws (2)

Installation Steps:

  1. Select Location for TekTouchPad
  2. Drill Screw Pilot Holes and Cable Pass-Through Hole
  3. Attach Mounting Wedge to Table
  4. Fasten Back Mounting Plate to Wedge
  5. Route Cable up through Mounting Wedge
  6. Connect & Mount TekTouchPad
  7. Finalize Cabling